V8 Eco Heat Recovery VRF System
R32 Low GWP | CE Certified | OEM ODM Commercial HVAC | Where Environmental Performance Meets Economic Sense
Sustainable VRF Platform for Green Building Certification
The Midea V8 Eco makes green building certification accessible without the typical capital premium. This 8 to 80 HP heat recovery VRF platform delivers the environmental performance required by LEED, BREEAM, and DGNB assessors while preserving project economics for small and mid-size commercial developments, residential complexes, and retrofit projects.
CE certified for European conformity, F-Gas compliant with eco-friendly R32 refrigerant (GWP 675), and ERP compliant for European eco-design requirements. The V8 Eco is the go-to European standard VRF solution for sustainability-focused projects.
Core Sustainability Features
Integrated Heat Recovery: Captures waste heat from cooling-mode operation and redirects it to heating zones, achieving a COP of 6.0. Simultaneous heating and cooling capability turns thermal waste into productive energy.
SEER 38: Exceptional Seasonal Energy Efficiency Ratio reflects real-world performance across entire cooling seasons, improving energy cost savings for green building certification.
IEER 9.0: Integrated Energy Efficiency Ratio captures performance across 25%, 50%, 75%, and 100% load conditions, optimized for typical commercial building operation patterns.
Green Building Certification Ready: Pre-qualified for LEED, BREEAM, and DGNB rating systems with performance data, R32 refrigerant selection, and control capabilities aligned with certification requirements.
Ideal for Retrofit Projects: Reduces cooling energy consumption by 40-60% compared to legacy fixed-speed systems, qualifying for utility rebates and retrofit certifications.
Individual Zone Control: Multi-zone independent temperature settings allow each area to maintain comfort parameters while minimizing unnecessary energy consumption.
BMS Integration: Native integration via Modbus RTU protocol and BACnet compatibility enables centralized monitoring, automated scheduling, and fault detection.
DC Inverter Compressor: Variable speed operation precisely matches output to thermal demand, delivering up to 40% energy savings over conventional systems.
Gold Fin Anti-Corrosion Coating: Provides salt spray protection for coastal installations and extends operational lifespan in aggressive atmospheric environments.
Application Scenarios
| Scenario |
Sustainability Relevance |
| Hotel VRF Solution |
Heat recovery enables simultaneous heating and cooling for guest rooms and common areas with individual zone control and energy-saving modes |
| Office Building VRF |
Commercial tower air conditioning with BMS integration and multi-zone independent temperature control |
| Hospital VRF System |
Healthcare facility air conditioning with heat recovery for clean room cooling and adjacent ward heating |
| Small-Mid Commercial Buildings |
High SEER/IEER at accessible price points democratizes green certification |
| Renovation & Retrofit |
40-60% energy reduction vs. legacy systems; qualifies for retrofit certifications and EU energy label improvement |
Regional Deployment
| Region |
Application |
| Europe |
European standard VRF; CE certified; ERP compliant; EU energy label ready; F-Gas regulation compliant |
| Middle East |
GCC standard compliant; heat recovery VRF for hotel and commercial applications |
| Southeast Asia |
Tropical VRF system with high humidity tolerance |
| Africa |
VRF system for tropical climate applications in mid-rise developments |
Certifications & Standards
CE Certified – Full compliance for European conformity
Eurovent – Certified performance data for European compliance
ERP Compliant – Meets EU eco-design directive requirements
EU Energy Label – Ready for European energy label classification
F-Gas Compliant – R32 eco-friendly refrigerant (GWP 675)
LEED Ready – Pre-aligned with Energy & Atmosphere requirements
BREEAM Ready – Supports Energy and Health category assessments
DGNB Ready – Meets Ecological Quality and Technical Quality criteria
TÜV SÜD – Third-party verified safety and efficiency
ISO 9001 – Manufacturing quality assurance
ISO 14001 – Environmental management system certification
ISO 45001 – Lifecycle safety standards compliance
Technical Specifications
| Parameter |
V8 Eco |
| Capacity Range |
8-80 HP |
| System Type |
Heat recovery VRF – simultaneous heating and cooling |
| Heat Recovery |
Integrated circuit |
| SEER |
38 |
| IEER |
9.0 |
| Heat Recovery COP |
6.0 |
| Compressor Type |
DC inverter compressor, variable speed operation |
| Energy Saving |
Up to 40% vs. conventional systems |
| Refrigerant |
R32 eco-friendly refrigerant (GWP 675), F-Gas compliant |
| Coil Protection |
Gold Fin anti-corrosion coating |
| BMS Protocols |
Modbus RTU, BACnet |
| Zone Control |
Individual zone control, multi-zone independent temperature |
| Green Certification |
LEED / BREEAM / DGNB ready |
Available Indoor Units
One-Way Cassette • Two-Way Cassette • Compact Four-Way Cassette • Four-Way Cassette • Arc Duct • Medium Static Duct • High Static Duct • Wall Mounted • Floor Standing • Ceiling & Floor
Your message must be between 20-3,000 characters!
