Midea VRF Compact HVAC for Renovations and Tight Spaces
Big building comfort with small building footprint. Installation so easy it feels like it was designed for your space.
Product Overview
The Midea V8 EasyFit VRF system delivers full-featured climate comfort in compact spaces where conventional systems cannot fit. With 8 to 54 HP capacity, these outdoor units are significantly smaller and lighter than conventional VRF systems, often installable on existing rooftop structures without reinforcement or in tight side yards and alcoves.
Cooling capacity ranges from 5,000 to 17,000 W per module with 80 Pa external static pressure sufficient for typical duct runs in low-rise and mid-rise commercial buildings. Total pipe length of 1,200 m and height differential of 30 m cover distribution needs for buildings up to 8-10 floors.
Full DC inverter technology delivers up to 40% energy savings with R32 refrigerant (GWP 675) that meets current environmental regulations. The 5-year warranty provides peace of mind for property owners.
Key Features
Compact Size, Full Performance
Outdoor units deliver the same comfort features as full-size V8 series in a smaller physical envelope with 20-30% less floor area than conventional VRF units.
- 20-30% smaller outdoor unit footprint vs. conventional VRF
- Full DC inverter technology with 40% energy savings
- Gold Fin anti-corrosion coating and IP55 protection standard
- META 2.0 intelligent control with zone-by-zone management
Installation Flexibility
Designed for renovation projects with constraints: lightweight design reduces structural reinforcement, compact dimensions fit through standard doorways, and flexible routing around existing structures.
- Lightweight design reduces structural reinforcement needs
- Compact dimensions fit through standard doorways
- 1,200 m total pipe length allows flexible routing
- 30 m height differential covers 8-10 floor buildings
Energy Efficiency
IEER of 9.0 and full DC inverter technology deliver up to 40% energy savings compared to fixed-speed alternatives, with R32 refrigerant providing higher thermodynamic efficiency.
- IEER 9.0 delivers best-in-class efficiency
- Full DC inverter technology saves up to 40% energy
- R32 refrigerant provides higher efficiency vs. R410A
- Smart scheduling enables off-peak operation
Quiet Operation
Engineered for low noise operation in sensitive environments like medical clinics, boutique hotels, and residential conversions with vibration-dampening compressor mounting.
- Outdoor units engineered for minimal disturbance
- Vibration-dampening compressor mounting
- Indoor ducted units operate at effectively inaudible levels
- Night-time quiet mode for noise-sensitive applications
Smart Control
Intuitive control system with wall-mounted controllers, centralized management, mobile app for remote monitoring, and practical scheduling features without subscription fees.
- Intuitive wall-mounted controllers
- Centralized controller for entire building management
- Mobile app for remote monitoring
- BACnet and Modbus RTU connectivity for BMS integration
Environmental Protection
Built for challenging conditions with standard Gold Fin anti-corrosion coating, IP55 protection, and T3 compressor classification for full capacity at 52°C ambient temperature.
- Gold Fin anti-corrosion coating as standard
- IP55-rated electrical enclosure protection
- T3 compressor classification - full capacity at 52°C
- Reliable performance in coastal, industrial, and extreme climates
Technical Specifications
| Parameter |
V8 EasyFit |
| Capacity Range |
8-54 HP |
| Cooling Capacity |
5,000 - 17,000 W per module |
| External Static Pressure |
80 Pa |
| Compressor Classification |
T3 - Full capacity at 52°C ambient |
| IEER |
Up to 9.0 |
| Energy Saving |
Up to 40% vs. fixed-speed (Full DC Inverter) |
| Refrigerant |
R32 (GWP 675) |
| Total Pipe Length |
1,200 m |
| Maximum Height Differential |
30 m |
| Anti-Corrosion |
Gold Fin condenser coating |
| Protection Rating |
IP55 |
| Communication Protocols |
Modbus RTU / BACnet |
| Warranty |
5 Years |
| Origin |
China |
| Brand |
Midea / Hongtai |
Applications
Renovated office buildings
Boutique hotels and guesthouses
Medical and dental clinics
Converted warehouses
Small retail stores and restaurants
Residential apartment buildings
Co-working spaces
Small schools and training centers
Rural commercial buildings
Pop-up retail installations
Certifications & Standards
TUV Certified
CE Marking
RoHS Compliant
ISO 9001
ISO 14001
ISO 45001
R32 Refrigerant
IP55 Ingress Protection
Gold Fin Coating
Product Gallery
Your message must be between 20-3,000 characters!
