Water Cooled Centrifugal Chiller MagBoost 1200-12500 kW MagLev Oil Free Ultra High Efficiency R134a R513A T3 55°C

The MagBoost's magnetic bearing system levitates the compressor shaft on a controllable magnetic field with absolutely zero physical contact and zero lubrication. This eliminates the entire oil system: oil pump, oil cooler, oil separator, oil filter, oil sump, and oil change schedule. In conventional centrifugal chillers, oil-related issues account for approximately 40% of all maintenance events and are the leading cause of unplanned downtime.

• No oil system at all – Eliminates 40% of centrifugal maintenance events
• No oil changes ever – Permanent elimination of recurring maintenance cost
• No oil degradation – Heat exchangers stay clean for the life of the machine
• No oil-related downtime – Eliminate the leading cause of centrifugal failures
• Lower vibration – Magnetic damping extends bearing and component life
• Quieter operation – No oil pump noise, smoother compressor running

The MagBoost achieves full-load COP values exceeding 6.0 and IPLV values exceeding 11.0—the highest efficiency ratings in the commercial chiller market. For a 5,000 kW district cooling plant operating at an average 60% load for 5,000 hours annually, the MagBoost's efficiency advantage over conventional centrifugals translates to significant annual energy savings.

• COP > 6.0 – Best-in-class full-load efficiency
• IPLV > 11.0 – Best-in-class annual integrated efficiency
• Annual savings of $300K-$500K – At 5,000 kW plant scale
• $6-$10M lifecycle savings – Over 20-year operating life
• Premium bid positioning – Win on demonstrated TCO advantage
• ESG and certification – Maximum points for LEED, BREEAM, Green Star

At up to 12,500 kW per machine, the MagBoost consolidates what previously required an entire chiller plant room into a fraction of the space. A 50,000 kW cooling requirement that traditionally needs 6-8 conventional centrifugal chillers can be met with just 3-4 MagBoost units.

• 12,500 kW per machine – Unprecedented single-unit capacity
• 3 MagBoost replace 6-8 conventional units – At 50,000 kW scale
• 60-70% smaller plant room – Free up valuable building space
• Fewer pipe connections – Dramatically reduce piping labor and materials
• Fewer electrical feeders – Reduced electrical infrastructure cost
• Faster commissioning – Fewer machines to start up and balance

The integrated TurboV variable-frequency drive controls the compressor motor speed with exceptional precision, continuously adjusting to match actual cooling demand. Unlike inlet guide vane systems that approximate capacity reduction through throttling, the VFD maintains the compressor at its exact optimum efficiency point across the entire operating range.

• Precision speed control – Compressor always at peak efficiency point
• Soft starting – Eliminates 6-8x inrush current, smaller electrical infrastructure
• Power factor > 0.98 – Near-unity, no utility penalty charges
• Harmonic distortion < 5% – Clean power, no filtering required
• Smooth modulation – No surging, no instability at any load
• Integrated safety – Over-current, over-voltage, thermal protection built-in

The MagBoost comes standard with an integrated edge computing module connected to the IoT cloud platform. Real-time operational data is analyzed locally for immediate optimization and transmitted to the cloud for long-term trend analysis and machine learning.

• Edge computing standard – Real-time local analysis and optimization
• IoT cloud connectivity – Long-term data trending and benchmarking
• Predictive maintenance – Detect issues weeks before failure
• Remote diagnostics – Factory engineers access data without site visits
• OTA software updates – Control improvements delivered over-the-air
• Premium service contracts – Predictive maintenance commands higher fees

The MagBoost's oil-free magnetic bearing technology and class-leading efficiency position it ahead of the global regulatory curve. As building energy codes tighten worldwide, the MagBoost's COP > 6.0 and IPLV > 11.0 ensure compliance without retrofit.

• Ahead of energy codes – Class-leading efficiency ensures compliance
• F-Gas compliant – R134a/R513A meets current and future regulations
• Smart grid ready – Prepared for demand response revenue programs
• OTA updateable – Future improvements without site visits
• No retrofit risk – Equipment exceeds foreseeable future requirements
• Stranded asset protection – Technology leads the regulatory trajectory