Corridors are the zones occupants judge without ever thinking about them: guests walk them at midnight, patients are wheeled along them, tenants notice every rattle and draught. The Midea One-way Cassette Fan Coil Unit is engineered to keep those zones comfortable and unremarkable. A 153mm chassis disappears into the narrow ceiling voids above corridors, lobbies and entryways where standard cassettes cannot go, and single-direction discharge carries conditioned air along the hallway instead of blowing it against walls. With cooling capacities from 2.65 to 5.20 kW across the combined AC and DC range, one product family covers hotel corridors, office hallways, apartment foyers and retail perimeters — so your team learns one unit, stocks one spare-parts list and runs one maintenance routine.
Water stains on corridor ceiling tiles are among the most avoidable complaints a facility team ever fields, and the built-in 750mm condensate pump is the reason you will not field them here: condensate lifts up and out without relying on gravity falls across long corridor runs. The unit runs on a standard 220-240V / 1Ph / 50Hz supply, and both motor tiers share the same body dimensions and G1/2" pipe connections — so AC and DC units are maintained identically, and a motor choice never becomes a spare-parts headache.
Choose the DC version — a DC inverter brushless motor with seven fan speeds via the KJR-75A wired controller — and the corridor fleet starts paying you back: power draw as low as 14W, fan energy cut by up to 30%, and operation 2-5 dB(A) quieter than the AC equivalent, which translates directly into fewer night-time noise complaints. Power-off memory restores previous settings automatically after outages, so a mains blip never means a manual reset round across hundreds of units. The washable filter pulls out from below in seconds without opening ceiling tiles, and Hongtai backs every project with OEM/ODM support — custom voltages from 180-440V at 50/60Hz, project branding, Modbus RTU and BACnet protocols — plus dependable spare-parts supply for the long service life ahead.
For back-of-house corridors and service areas where simple 3-speed control is adequate, the AC version keeps capital cost low and spares universal. For guest-facing corridors in hotels and hospitals — where one noisy unit generates complaints at 2 a.m. — the DC inverter brushless version earns its modest premium every day: up to 30% lower fan energy, 2-5 dB(A) quieter operation and seven-speed fine-tuning via the KJR-75A. Both share the same 153mm body, 750mm pump and G1/2" connections — so maintenance procedures and spare parts stay identical whichever you specify.
Cleaning frequency follows local dust conditions, but the job itself takes minutes: the washable filter pulls out from below without removing ceiling tiles, so one technician covers a full corridor run in a single round.
The DC range runs from 33.5 dB(A) at high speed — and lower still at reduced fan speeds — while operating 2-5 dB(A) quieter than the AC equivalent. For hotel and hospital corridors, DC is the specification that keeps the phone quiet.
Nothing that involves your team. Power-off memory restores previous settings automatically when supply returns — no manual reset round, no units left running at full speed for weeks unnoticed.
Yes. Hongtai supports OEM/ODM control options including Modbus RTU and BACnet protocols, specified at order stage to match your BMS integration plan.
A 750mm-lift drain pump is built in as standard, so condensate is pumped up and out without relying on gravity slopes. Check the drain pan during routine filter cleaning to keep the system trouble-free.
| Parameter | AC Series | DC Series |
|---|---|---|
| Airflow Range | 300-400 CFM | 300-600 CFM |
| Cooling Capacity | 3.04-3.79 kW | 2.65-5.20 kW |
| Heating Capacity | 5.13-6.41 kW | 3.15-5.75 kW |
| Power Input | 32-40 W | 14-38 W |
| Sound Pressure Level (H) | 36-37 dB(A) | 33.5-44.6 dB(A) |
| Power Supply | 220-240V / 1Ph / 50Hz | 220-240V / 1Ph / 50Hz |
| Drain Pump Head | 750 mm | 750 mm |
| Body Height | 153 mm | 153 mm |
| Coil Rows | 2 | 2 |
| Max. Working Pressure | 1.6 MPa | 1.6 MPa |
| Motor Type | Low-noise 3-speed AC | DC Brushless |
| Pipe Connection | G1/2" | G1/2" |
Corridors are the zones occupants judge without ever thinking about them: guests walk them at midnight, patients are wheeled along them, tenants notice every rattle and draught. The Midea One-way Cassette Fan Coil Unit is engineered to keep those zones comfortable and unremarkable. A 153mm chassis disappears into the narrow ceiling voids above corridors, lobbies and entryways where standard cassettes cannot go, and single-direction discharge carries conditioned air along the hallway instead of blowing it against walls. With cooling capacities from 2.65 to 5.20 kW across the combined AC and DC range, one product family covers hotel corridors, office hallways, apartment foyers and retail perimeters — so your team learns one unit, stocks one spare-parts list and runs one maintenance routine.
Water stains on corridor ceiling tiles are among the most avoidable complaints a facility team ever fields, and the built-in 750mm condensate pump is the reason you will not field them here: condensate lifts up and out without relying on gravity falls across long corridor runs. The unit runs on a standard 220-240V / 1Ph / 50Hz supply, and both motor tiers share the same body dimensions and G1/2" pipe connections — so AC and DC units are maintained identically, and a motor choice never becomes a spare-parts headache.
Choose the DC version — a DC inverter brushless motor with seven fan speeds via the KJR-75A wired controller — and the corridor fleet starts paying you back: power draw as low as 14W, fan energy cut by up to 30%, and operation 2-5 dB(A) quieter than the AC equivalent, which translates directly into fewer night-time noise complaints. Power-off memory restores previous settings automatically after outages, so a mains blip never means a manual reset round across hundreds of units. The washable filter pulls out from below in seconds without opening ceiling tiles, and Hongtai backs every project with OEM/ODM support — custom voltages from 180-440V at 50/60Hz, project branding, Modbus RTU and BACnet protocols — plus dependable spare-parts supply for the long service life ahead.
For back-of-house corridors and service areas where simple 3-speed control is adequate, the AC version keeps capital cost low and spares universal. For guest-facing corridors in hotels and hospitals — where one noisy unit generates complaints at 2 a.m. — the DC inverter brushless version earns its modest premium every day: up to 30% lower fan energy, 2-5 dB(A) quieter operation and seven-speed fine-tuning via the KJR-75A. Both share the same 153mm body, 750mm pump and G1/2" connections — so maintenance procedures and spare parts stay identical whichever you specify.
Cleaning frequency follows local dust conditions, but the job itself takes minutes: the washable filter pulls out from below without removing ceiling tiles, so one technician covers a full corridor run in a single round.
The DC range runs from 33.5 dB(A) at high speed — and lower still at reduced fan speeds — while operating 2-5 dB(A) quieter than the AC equivalent. For hotel and hospital corridors, DC is the specification that keeps the phone quiet.
Nothing that involves your team. Power-off memory restores previous settings automatically when supply returns — no manual reset round, no units left running at full speed for weeks unnoticed.
Yes. Hongtai supports OEM/ODM control options including Modbus RTU and BACnet protocols, specified at order stage to match your BMS integration plan.
A 750mm-lift drain pump is built in as standard, so condensate is pumped up and out without relying on gravity slopes. Check the drain pan during routine filter cleaning to keep the system trouble-free.
| Parameter | AC Series | DC Series |
|---|---|---|
| Airflow Range | 300-400 CFM | 300-600 CFM |
| Cooling Capacity | 3.04-3.79 kW | 2.65-5.20 kW |
| Heating Capacity | 5.13-6.41 kW | 3.15-5.75 kW |
| Power Input | 32-40 W | 14-38 W |
| Sound Pressure Level (H) | 36-37 dB(A) | 33.5-44.6 dB(A) |
| Power Supply | 220-240V / 1Ph / 50Hz | 220-240V / 1Ph / 50Hz |
| Drain Pump Head | 750 mm | 750 mm |
| Body Height | 153 mm | 153 mm |
| Coil Rows | 2 | 2 |
| Max. Working Pressure | 1.6 MPa | 1.6 MPa |
| Motor Type | Low-noise 3-speed AC | DC Brushless |
| Pipe Connection | G1/2" | G1/2" |