Midea Compact Cassette FCU Drops Straight Into 585mm Grids Swap Ready Compact Cassette FCU Zero Ceiling Grid Rework Needed

Refurbishment and tenant fit-out work is where margins go to die: the old unit comes out, the grid turns out to be an odd size, and a one-day swap becomes three. The Midea Compact Four-way Cassette Fan Coil Unit is sized to end that story — a 575×575mm body that drops straight into the standard 585mm ceiling grid used in commercial buildings worldwide. Pull the old unit, drop this one in, reconnect, commission. No grid cutting, no custom framing, no ceiling patching. With 400–600 CFM and cooling capacities from 2.98 to 4.78 kW across the AC and DC range, it covers the small-to-medium zones that make up most retrofit schedules of rates.

At 204mm body height — just 198mm on 3rd Generation DC models — the unit clears shallow ceiling voids that defeat standard cassettes, often the difference between winning and walking away from older buildings. The 500mm drain pump (1200mm on 3rd Gen) removes condensate without slope work or structural drainage changes, and the integrated safety mesh protects your technicians during filter service, keeping site safety audits clean. The standard 360° panel delivers even air distribution with no vane balancing time at commissioning — one less task per unit before sign-off.

The DC inverter brushless version draws as little as 5W at low speed and cuts fan energy by up to 30% — a persuasive line item when quoting whole-floor replacements to cost-conscious landlords. Seven fan speeds via the KJR-75A controller let you tune each room at handover, and 2-pipe or 4-pipe factory versions match whatever hydraulics the existing building gives you. All models run on 220–240V / 1Ph / 50Hz, and Hongtai supports chain-wide rollouts with OEM/ODM customisation — custom voltages from 180–440V at 50/60Hz, project branding, and Modbus/BACnet protocols — plus steady spare-parts supply across the contract period.

• 575 × 575mm Drop-In Dimensions — Fits standard 585mm ceiling grids with zero rework; one-day swaps stay one-day swaps.
• 204mm / 198mm Shallow-Void Height — Clears tight ceiling spaces in older buildings that defeat standard cassettes.
• 500mm / 1200mm Drain Pump — Condensate handled without slope work or structural drainage changes.
• Standard 360° Panel — Even distribution with no vane balancing; faster commissioning per unit.
• Integrated Safety Mesh — Protects technicians during filter service; keeps site safety audits clean.
• DC from 5W Low-Speed Draw — Up to 30% energy saving makes whole-floor replacement quotes easy for landlords to approve.
• 2-Pipe and 4-Pipe Versions — Match existing hydraulics in any retrofit without site modification.
• OEM/ODM Rollout Support via Hongtai — Custom voltage, branding and protocols plus spare-parts continuity for multi-site contracts.

For like-for-like replacements where the budget is fixed by an insurance claim or a tight refurbishment schedule, AC keeps the swap simple and economical. For whole-floor replacements quoted to an owner who will live with the energy bills, the DC inverter brushless version is the stronger tender: from 5W at low speed, up to 30% less fan energy, seven speeds via the KJR-75A, and 198mm height on 3rd Generation models for the shallowest voids. Dimensions, grid fit and pipe connections are identical, so crews install both the same way.

1. Office Suite Refurbishments — Drop-in replacement keeps tenant disruption measured in hours, not days.
2. Hotel Guestroom Renovations — Compact height fits shallow bathroom-lobby ceilings; quiet DC operation protects guest experience.
3. Clinics and Treatment Rooms — Safety mesh and low-noise DC models suit healthcare compliance regimes.
4. Meeting Rooms and Small Offices — Right-sized 400–600 CFM capacity avoids over-conditioning small zones.
5. Franchise and Chain Fit-Outs — One standardised unit across every site simplifies procurement, training and spares holding.

• CE Marking — European conformity for safety and electromagnetic compatibility.
• Eurovent Certified Performance — Third-party verified capacity and efficiency ratings.
• ERP Compliant — Meets EU Energy-related Products Directive requirements.
• RoHS Compliant — Restriction of Hazardous Substances directive conformance.
• GB/T 19232 — Chinese national standard for fan coil unit performance testing.

compact cassette fan coil unit · 575x575 cassette FCU · 585mm ceiling grid air conditioner · small room cassette FCU · cassette replacement unit no rework · shallow ceiling cassette fan coil · mini cassette FCU for grid ceiling · quiet DC cassette fan coil