Low Carbon Corridor FCU with Built In 750mm Pump Fast Retrofit DC Brushless One Way Cassette FCU 14W Low Draw 30 Energy Saving

Corridor and perimeter zones typically carry the largest terminal count in a building and the longest running hours, making them the first place an energy manager reviews when a consumption report arrives. The Midea One-way Cassette Fan Coil Unit is engineered for that audit trail. A 153mm chassis fits the narrow ceiling voids above corridors, lobbies and room entryways where standard cassettes cannot go, and single-direction discharge throws air along the hallway instead of loading the walls, so the zone is served at the capacity it actually needs. Across the combined AC and DC range the family spans 300–600 CFM and 2.65–5.20 kW of cooling, meaning one product line covers an entire corridor schedule without mixing suppliers or spare-part sets.

Fan energy is the part of a terminal's consumption that a specification can still influence at design stage. The DC inverter brushless version uses a seven-speed motor driven from the KJR-75A wired controller and draws as little as 14W, against 32–40W for the AC equivalent, cutting fan energy by up to 30%. It also runs 2–5 dB(A) quieter, and that matters as much as the kWh figure: quieter terminals let a corridor or ward run at low speed without complaint, so the low-watt setting is actually used instead of being overridden. ERP compliance and RoHS conformance are standard across the range, giving consultants the documentation they need without a separate request.

Measurement is where sustainability targets are proven. Units run on standard 220–240V / 1Ph / 50Hz supply, and Hongtai's OEM/ODM programme adds custom voltages from 180–440V at 50/60Hz, project branding, and Modbus RTU or BACnet protocols so corridor terminals report into the building's energy monitoring platform instead of sitting outside it. Power-off memory restores settings after outages so energy set-backs survive a power event, and the washable filter pulls out from below for quick cleaning, because a terminal that is easy to maintain keeps its rated performance for the whole lifecycle. Specifications of this kind support green building targets across corridor and guestroom floors.

• 153mm Ultra-Slim Body — Fits narrow corridor voids where standard cassettes cannot go; no ceiling rebuild and no added fit-out material.
• 14W Minimum Draw (DC) — Lowest-speed operation costs a fraction of the AC version's 32–40W; built for continuously running corridor zones.
• Up to 30% Lower Fan Energy — DC brushless motor cuts terminal-level consumption against the AC equivalent on the same duty.
• 2–5 dB(A) Quieter DC Operation — Acoustic comfort at low speed means energy set-backs are not overridden by occupants.
• ERP and RoHS Compliant — Documentation ready for European tenders and green procurement checklists.
• Built-In 750mm Drain Pump — No condensate slope work; fewer leak call-backs and no ceiling-tile replacement waste.
• Modbus RTU and BACnet via Hongtai OEM/ODM — Corridor terminals are metered and reported with the rest of the building.
• Power-Off Memory and Washable Filter — Settings survive outages and service takes minutes, holding rated performance across the lifecycle.

Treat this as a metering decision rather than a comfort decision. The AC version is the compliant baseline: a proven three-speed motor, 32–40W input, and the lowest unit price, which suits corridors on intermittent schedules or projects where terminal load is a small share of total consumption. The DC inverter brushless version is the lifecycle choice: from 14W at minimum speed, up to 30% lower fan energy, and 2–5 dB(A) quieter, all from the same 153mm body, 750mm pump and G1/2" connections. Because the installation method is identical, the motor decision is purely an operating-cost decision, and on a corridor with hundreds of running hours per year that is exactly where the difference accumulates.

1. Hotel Corridor Packages — Long runs of slim terminals at low speed; DC operation protects guest sleep while keeping corridor consumption down.
2. Office Hallways and Lift Lobbies — Directional airflow conditions circulation zones efficiently without oversized capacity.
3. Apartment Entry Halls — Compact profile preserves ceiling height in residential common areas and lift approaches.
4. Retail Perimeter Zones — Single-direction discharge sweeps along shopfronts and display glazing without dead spots or excess capacity.
5. Hospital Ward Corridors — Low-noise DC operation and quick filter access suit round-the-clock healthcare estates.

• CE Marking — European conformity for safety and electromagnetic compatibility.
• Eurovent Certified Performance — Third-party verified capacity and efficiency ratings.
• ERP Compliant — Meets EU Energy-related Products Directive requirements.
• RoHS Compliant — Restriction of Hazardous Substances directive conformance.
• GB/T 19232 — Chinese national standard for fan coil unit performance testing.

• energy efficient one-way cassette FCU
• 153mm slim cassette 30% saving
• DC brushless corridor fan coil
• low carbon fan coil unit
• ERP compliant fan coil unit
• low watt fan coil 14W
• fan coil with built-in drain pump
• sustainable hotel corridor HVAC