Wall Mounted FCU Retrofit Three Piping Directions Zero Ceiling DC Wall FCU Draws 10W at Low Speed 30 Saving in 24 7 Rooms

Some buildings simply have no ceiling to work with: heritage conversions, mid-rise walk-ups, budget hotels, and school blocks built without suspended voids. Retrofitting those assets is exactly what a portfolio-level carbon target depends on, and it is also where a cassette-only or ducted-only specification gives up. The Midea Wall Mounted Fan Coil Unit keeps those buildings in scope. It mounts directly on the wall, so there is no ceiling crew, no void work, no grid subcontractor to coordinate, and no ceiling material removed or replaced. Left, right, or rear water connections match wherever the existing risers and pipework actually are, which is the difference between an awkward retrofit quote and a straightforward one. One family spans 300–600 CFM with cooling capacities from 1.94 to 4.87 kW across the AC and DC range.

The DC inverter brushless version draws just 10W at low speed and cuts overall fan energy by up to 30%, which is the figure that matters in rooms running around the clock. It also runs 2–5 dB(A) quieter than the AC equivalent, from 27 dB(A) at the low end, and that acoustic headroom is what makes low-speed operation viable: a guestroom or dormitory that stays quiet on low fan keeps the energy strategy intact instead of being turned up by the occupant. The oscillating louver prevents the draught complaints that generate call-backs, and the display shutoff keeps bedrooms dark at night. The front panel removes without tools, so filter service is a quick visit, and the unit keeps its rated power draw between services.

Two panel designs (A Type and P Type) match different interior finishes without changing the unit behind them, which keeps multi-site rollouts simple for procurement and spares. Standard supply is 220–240V / 1Ph / 50Hz, and 0–10V input/output integrates with building management systems so room-level consumption can be monitored rather than estimated. Hongtai supports export contractors with OEM/ODM customisation covering custom voltages from 180–440V at 50/60Hz, project branding, and Modbus RTU or BACnet protocols. ERP and RoHS compliance is standard, which matters most in exactly the building types this unit was designed for.

• 10W Low-Speed Draw (DC) — Rooms running 24/7 cost a fraction to ventilate; the strongest case in the range for continuous occupancy.
• Up to 30% Lower Fan Energy — Brushless drive cuts terminal consumption in exactly the building types with the least room for plant upgrades.
• 27 dB(A) and 2–5 dB(A) Quieter — Low-speed operation holds without occupant complaint, so the energy setting is not overridden.
• No Ceiling Required — Keeps heritage, walk-up, and no-void buildings in the retrofit programme instead of out of scope.
• Left, Right, or Rear Piping — Connects to existing risers wherever they are; no re-plumbing and no boxing-in material.
• 0–10V BMS Input/Output — Room-level consumption monitored rather than estimated, with Modbus RTU or BACnet available via OEM/ODM.
• ERP and RoHS Compliant — Documentation ready for European tenders and green procurement review.
• Tool-Free Front Access — Filter service without tools keeps maintenance visits short and rated performance steady.

Where rooms are used a few hours a day and the budget is fixed, the AC 3-speed version delivers full comfort at the lowest unit price. Where rooms run around the clock — the norm in hotels, rental apartments, and dormitories — the DC inverter brushless version is the defensible choice: 10W at low speed, up to 30% lower fan energy, and quieter night operation from 27 dB(A). Both versions share the same wall-mounting method, piping directions, and panel options, so the motor choice never complicates the installation, and the two can be mixed across a building as capital becomes available.

1. Heritage and Conversion Retrofits — Modern comfort where ceiling modification is structurally or legally restricted, with no material demolished.
2. Budget Hotels and Serviced Apartments — 10W low-speed DC operation suits thin-margin hospitality economics and continuous occupancy.
3. Residential Walk-Ups and Mid-Rise Blocks — Delivers comfort in buildings that would otherwise be excluded from a retrofit programme.
4. Classrooms and Dormitories — Robust, low-maintenance units hold rated performance through institutional use.
5. Clinics and Consulting Rooms — Accessible wall mounting without penetrating ceiling membranes or disturbing the envelope.

• CE Marking — European conformity for safety and electromagnetic compatibility.
• Eurovent Certified Performance — Third-party verified capacity and efficiency ratings.
• ERP Compliant — Meets EU Energy-related Products Directive requirements.
• RoHS Compliant — Restriction of Hazardous Substances directive conformance.
• GB/T 19232 — Chinese national standard for fan coil unit performance testing.

• energy efficient wall mounted fan coil
• low carbon wall FCU
• 10W DC wall fan coil
• ERP compliant wall FCU
• retrofit fan coil no ceiling
• sustainable hotel room HVAC
• wall FCU 0-10V BMS
• quiet low energy fan coil